Sportsamico WARRANTY WARRANTY sportsamico products and components are warranted against failure or defect arising from normal use for 12 months from the date of purchase. Postage and labour charges are not included in this warranty. sportmateaction will replace or repair at their discretion any frame found to be defective in materials or workmanship. EXCLUSIONS The warranty, does not cover tear and mormal wear and all warranties are void if the product is used for other than normal activities. Repairs or replacements required where there is evidence that such conditions have contributed to a component failure; will not be covered by the warranty. Other exclusions are: Damage affected by outer force, Intervention by unauthorized parties, Incorrect handling of the product, Non-compliance of the operating instructions and Commercial Use. NOTICE This warranty does not cover any personal injuries, damage to or failure of the product or any other losses due to accident, misuse, neglect, abuse, normal wear, improper assembly or improper maintenance. Claims under this warranty should be made to your authorized sportmateaction with dated proof of purchase and said dealer will determine if the component is defective. Any defective part will be replaced free of charge. Installation labour is not included in this warranty. This warranty is extended to the original owner only and does not cover any defect, malfunction or failure which does not conform to the limited warranty aforesaid. PLEASE NOTE: YOUR WARRANTY IS ONLY VALID IF YOU CAN PROVE YOU ARE THE ORIGINAL PURCHASER ON THIS ITEM (i.e. A copy of the receipt, invoice, delivery date or internet confirmation). DEFINITION OF sportmateaction WARRANTY POLICY General Terms: Warranty commences date of sale. Proof of purchase is required for any warranty claim. All claims require the item returned to the place of purchase. Repair, replacement and adjustment are not available for defects, faults or failures due to: Ordinary wear and tear; user negligence, misuse or abuse, accident, fire, or Malicious damage by a third person; alterations or modifications by a non authorized service technician Failure to service the equipment in accordance with the user manual’s Specifications and recommendations. Rusting of equipment All equipment is warranted for domestic use only. Chargeable : Labor cost outside of warranty period will be charged. Parts outside of warranty period or conditions will be charged accordingly and will incur freight cost. Products from sportsamico that are used in a rental or hire situation will not qualify On-site warranty. Call outs are not included in sportmate’s warranty policy. For all call outs, a fee will apply plus labor charge. Policy of sportsamico's Warranty Proof of Purchase The customer needs to provide proof of purchase before any warranty work or parts will be provided. An official invoice from sportsamico is the only means by which proof of purchase can be accepted. This invoice should at all times state the serial number of the product if available at the time of purchase. Definition of Warranty The warranty shall guarantee that all components are free from defects or faulty manufacture for a period stated pertaining to a particular brand. All faulty components shall be replaced or supplied free of charge as set out in this policy. All warranties in this policy apply to home use only. These warranties do not apply to products used in any commercial use. Warranty does not cover normal wear & tear. Freight Costs The cost of freighting the replacement part under warranty, or component to the customer will incur standard transport fees. The cost of freighting products or parts to sportmateaction shall be at the expense of the customer, unless within DOA period Returned Goods The unauthorized return of parts or product shall be at the expense of the customer. sportmateaction will not be liable for the freight or return of the product DoA (Dead on Arrival) “DoA” applies to products which have a major fault within 14 days of customer purchase. These products may be repaired or replaced at the discretion of sportsamico. REFUNDS POLICY: If the item is damaged or faulty upon receiving it, you are entitled to a refund. The conditions of the refund are as follows. Claims must be made in writing within the first 7 days upon receiving your item to entitle you to a refund. FREIGHT is non refundable. Claims made after this period of time, items will be repaired. If item cannot be repaired, then a replacement will be provided. This warranty does not cover any damage caused by transportation of your item, we are not responsible for damage in transit, if you suspect any damage to your item you may sign your item “UNCHECKED” or you may need to obtain transport insurance.
Treadmill Trouble Shooting
(1) Treadmill automatically stops
-- Possible causes: 1, short-circuit lines, 2, the internal cable problems; 3, controller problems.
-- Solution: 1, double-check the lines; 2, check cable, 3, the replacement controller board.
(2) Electric treadmill cannot speed up
-- Possible causes: 1, dashboard damage, 2, sensors broken, 3, controller board broken.
-- Solution: 1, the replacement of the instrument panel, 2, the replacement of sensors, 3, the replacement controller board.
(3) Treadmill doesn’t run properly; skidding then pausing
-- Possible causes: 1, with running belt too loose, 2, treadmill belt, a multi-groove pine.
-- Solution: 1, regulating the balance between running belt with the back-end bolts (by rotating clockwise direction to a reasonable date), 2, regulation of motor fixed position.
(4) Movement makes noise
-- Possible causes: 1, between motor cover and the running belt space is too small, 2, perhaps because the campaign with running boards and running belt between the involved foreign bodies, 3, Running belt with serious side band, and running boards on both sides of the friction, 4, the electrical noise
-- Solution:, 1, will be covered for a correction or replacement, 2, removing foreign bodies, 3, the balance will be running belt with regulation, 4, the replacement motor.
(5) Why can’t start treadmill?
-- Possible causes: 1, no power or electricity, 2, fuse links, 3, electrical switches broken, 4, and for any other reasons please contact us and professionals.
-- Solution: 1, check the power supply; 2, replace fuses, 3, replace the power switch.
(6) The treadmill runs unevenly
-- Possible causes: 1, the treadmill imbalance between the front axle and rear axle, 2, the movement of running posture is not very standard, the left foot forced uneven, resulting in uneven level.
-- Solution: adjust the balance wheel.
(7) Treadmill exercise program process error »
-- Possible causes: 1, the instrument cable is not connected properly, 2, instrumentation, circuit boards broken
-- Solution: 1, inspect the power cable, 2, replace the control panel
(8) Electric motor treadmill exercise makes noise
-- Possible causes: 1, may motor brush is nearly finished; 2,the motor is pushing touch against an object while running
-- Solution: 1, inspect or replace motor brush, 2, remove foreign bodies.
(9) Connect the power to open the power switch power indicator light is not bright
-- Possible causes: 1, check power plug
-- Solution: 1, the replacement power switch or plug.
(10) electronic control panel do not show
-- Possible causes: 1, the Line of Control not to good, 2, the driver board the transformer broken, 3, the burning of insurance, 4, the power of burning;
-- Solution: 1, the first inspection of the wiring, 2, the replacement controller
(11) button not working
-- Possible causes: 1, keys ageing 2, button-board change;
-- Solution: 1, the replacement of keys, 2, locking keys circuit boards.
(12) showed that incomplete
-- Possible causes: 1, LCD connection is bad, 2, LCD tablet with long aging;
-- Solution: 1, locking circuit board fixed screws, 2, the replacement of electronic form.
(13) the heart can not test
-- Possible causes: 1, damage to the heart ear folder 2, circuit boards heart damage;
-- Solution: 1, the replacement ear folder heartbeat, 2, the replacement heart circuit boards.
(14) shows flashes
-- Possible causes: 1, the line of control connection is bad, 2, the static interference;
-- Solution: 1, to better the Line of Control, 2, grounding line is not good then.
(15) phenomenon of violence -
-- Possible causes: 1, load too large, 2, It too much friction between running belt and running boards 3, controller board components damaged; 4, computer programming error;
-- Solution: 1, reducing the load, the replacement controller plate; 2, add running boards maintenance of oil, 3, the replacement of electronic form.
(16) load a standstill
-- Possible causes: 1, drivers did not adjust well-torque 2, running belt with partial 3, running with friction between the plate and running too large;
-- Solution: 1, clockwise for one or two large grid, 2, with re-conditioning running belt, 3, add running boards maintenance of oil.
(17) noise
-- Possible causes: 1, roller bearings caused damage to the Kacha sound; 2, running with the sound of friction, 3, motor Fengye sound;
-- Solution: 1, the replacement of drum 2, with clean running 3, the replacement motor.
(18) failed to start
-- Possible causes: 1, the power switch is not open, 2, no power supply, 3, no safety switch is placed; 4, the Line of Controller damaged or not received at 5, on the opening shielding, the cable is loose; 6, driver of the board of damage insurance; 7, the power-controller board of burning; 8, the controller board transformer damage 9, motor burned;
-- Solution: 1, open the switch; 2, when the calls started, 3, placed safety switches; 4, good control of the online connection the various joints, 5, and then good internal links; 6, replacement controller 7, replacement motor
(19) can not be gained
-- Possible causes: 1, key link Missed good 2, did not line up motor control to good 3, up motor cable or not to loose 4, the drive-control system damage; 5, up Motor damage;
-- Solution: a check received after good 2, after inspection to good 3, followed by a good inspection, 4, the replacement controller ; 5, the replacement of up motor.
(20) The use of a period of time, speed is automatically stop
-- Possible causes: 1, check whether the safety switch bounce backward, not in electronic form; 2, to be in regular running boards add oil, 3 to check whether the connection is bad cable connection
-- Solution: a safety switch will be placed, try again, 2, add the treadmill lubricants, 3, the replacement of cables.
(21) when they do not feel the smooth running
-- Possible causes: 1, check with running too loose, 2, check whether the multi-groove belt too loose;
-- Solution: 1, to be based on instructions manual adjustments 2, will be transferred to the minimum speed, with their feet of to go zone, more than observe the elastic belt trough situation, adjustments to the former drum 3, running boards add running boards lubricating oil .
(22) use for some time, feeling more and more vibration
-- Possible causes: 1, inspection and more slot belt trenches 2, check whether the vibration generated by the motor; 3, drum round of inspections before and after the normal rotation is not;
-- Solution: 1, will ditch clean debris removal; 2, to be replaced; 3, the replacement of drum.
(23) use after a period of time, have a different sound
-- Possible causes: 1, before and after the inspection whether the damaged wheel roll, 2, check whether the brushless motor wear unevenly, 3 to check whether motor cover fixed screw loose; 4, pulley speed touch sensors; 5, running band - Running into the foreign body;
-- Solution: 1, the replacement of drum 2, the replacement of carbon brush, 3, will be fixed screws tightened, 4, will be transferred to the appropriate speed sensor location; 5, removal of foreign objects.
(24) after the commencement of about 5 to 10 seconds, the electronic table shows the E-1
-- Possible causes: 1, the speed sensor line check whether the connection is bad or loose joints; 2, sensors and front-wheel-magnet distance, not sensing, 3, None of the above, would replace the control panel or electronic form;
-- Solution: 1, the speed sensor will be locked, if the connection is bad, the replacement rate sensors, 2, the normal 2 to 3 mm; 3, clockwise adjustment driver board the SPEED-VR, launched repeated adjustments to the appropriate location .
(25) electronic display window table missing painting
-- Possible causes: 1, open the electronic form, check whether the PC-board fixed screws for locking;
-- Solution: 1, locking screws, 2, the replacement of electronic form.
(26) machines have a strange smell or smoke
-- Possible causes: 1, open motor cover to see whether the cable short-circuit, 2, motor load testing, it has continued to exceed the current rating;
-- Solution: 1, the replacement of cables, 2, if the current rating exceeded the replacement motor, 3, regularly need to add running boards lubricating oil running board (at least a month), a home every seven days.
(27) no action button electronic form
-- Possible causes: 1, check whether the safety switch bounce backward, not in electronic form; 2, connected to cable did not properly;
-- Solution: 1, the safety switch press 2, then cable will be good; 3, the replacement of electronic form.
(28) of leakage
-- Possible causes: 1, check wires and cables connecting the Popi, and the framework of short-circuit, 2, the control panel leakage, 3, motor leakage;
-- Solution: 1, the replacement of cables, 2, the replacement of the control panel, 3, the replacement of motors.
(29) holding the value is too high or no heartbeat sensor
-- Possible causes: 1, can not be detected when the hand shaking hands or too heavy, 2, to detect when the value exceeds 200 wires need to test whether short-circuit, 3 to check whether the sensors weirl line with the framework of injured or short-circuit;
-- Solution: 1, the replacement of two short-circuit wiring, replacement of sensors; 3, the replacement of the control panel.
(30) can not speed up or slow down
-- Possible causes: 1, check the connections cable connector has connection is bad, 2, check e-row table internal button whether there are fault lines \% injury \ shedding 3, the electronic table bad; 4, motor control panel bad;
-- Solution: 1, the replacement of cables, 2, the replacement of electronic Table 3, the replacement of the control panel.
(31) Table button electronic failure
-- Possible causes: 1, check e-row table internal button whether there are fault lines \% injury \ falling keys or electronic form did not lock the floor;
-- Solution: 1, open the electronic form, will be key electronic board
Treadmill Maintenance
1, clean
Regular removal of dust to protect the internal parts of clean, under running belt reduce the accumulation of debris. To ensure that sports shoes clean, to avoid running into the foreign body to carry wear running boards and run with. Cloth can be cleaned with soap and clean running belt, not to The use of cleaning agents, and each finished using the treadmill, it will handle, ran into the sweat wiped away.
2, the use of lubricants treadmill
between the running belt and the board , the factory has already put anti-static lubricants. Recommendations ordinary users in the machine in operation after 100 hours put lubricants.
3, with the running of the regulation
In order to make the treadmill to work better, we need to be adjusted to run with the best condition. As we are often running around the legs forced inconsistent, sometimes it will run with a deviation from the phenomenon. If running with the right bias, the right of the adjustment bolt clockwise direction along the rotating 1 / 2 laps, and then the left side of the adjustment bolt along the counter-clockwise rotating 1 / 2 laps to. If left running with bias, to the contrary.
4, the day-to-day maintenance of the hydraulic -
In order to extend the service life of hydraulic rod should be reinforced once a month,
Is: Use the wrench to tighten hydraulic rod screws, and use the treadmill lubrication oil hydraulic rod.
check
1. Periodic cleaning of aircraft, and the fuselage beneath the dust. Proposed to use soft cotton cloth gently swabbing. Do not use acidic cleaning agents.
2. Periodic inspection run and run with a plate between the foreign body, such as chewing gum, biological, and other small. If it is found that foreign bodies, should be cleared immediately.
Below the proposed treadmill, treadmill covered with mats for the campaign, running on the one hand can eliminate the noise and protect the floor, on the other hand can be effective in preventing the entry of foreign matter and dust, or go with the chassis and running between the plate.
3. Periodic inspection run with the tightness, and whether there is any deviation phenomenon.
4. Treadmill regularly check the emergency braking function, to ensure safe and effective.
Specific methods of operation:
1. Electricity, opened with the left running, lubricants bottles Shenjin running band.
2. Lubricants will be crowded in the running board (two in one), the amount of control within 10 ml.
3. With the right side of the left side of the operation of the same. (Figure 3 Figure 4)
4. Telegram, the treadmill will operate in three km / hour, 2 minutes idling treadmill, lubricants evenly coated with jogging and running in between the boards.
5. Treadmill can immediately work properly.
Frequency of use:
A. treadmill two hours a day more than home users
-- 2 times per month;
B. gym, and other commercial treadmill
-- According to the use of the length of time, due to the increased frequency of use;
C. treadmill use of the very few number of users
-- Raised his running with the view to the future level of use of lubrication.
NOTES:
An excessive use of force to prevent Sassafras tsumu too small motorized treadmill belt and pulley drive between the skid affect the normal use.
The sound of the skin lubricant, but not consumption; splash into the eyes of the event, should be promptly cleaned with water.
Difficult to contact the child placed
